Latex Powder-Free Examination Gloves
- Ambidextrous
- Powder free with the lowest protein content
- Low antigen content in proteins
- Exceeds Federal guidelines on maximum allowable extractable protein content
- 100% latex material which provides for an ergonomic fit, tactile sensitivity and excellent elasticity
- Beaded cuff for easier donning and resistant to roll downs
- Textured for better grip
- High tensile strength with excellent barrier integrity
- Low modulus for superior comfort
- Non-Sterile
- Single use disposable
- Available sizes: Extra Small, Small, Medium, Large, Extra Large
Typical Physical Properties
Dimensions:
| Glove Size | Article Number | Minimum Length | Average Palm Width (mm) |
| X-Small (5-6) | 1002-5 | 240 mm (9.45 inches) | 75 (± 5) |
| Small (6-7) | 1002-6 | 240 mm (9.45 inches) | 85 (± 5) |
| Medium (7-8) | 1002-7 | 240 mm (9.45 inches) | 95 (± 5) |
| Large (8-9) | 1002-8 | 240 mm (9.45 inches) | 105 (± 5) |
| X-Large (9-10) | 1002-9 | 240 mm (9.45 inches) | 115 (± 5) |
Thickness Profile (Single Wall):
| mm | mils | |
| Finger Tip (Middle Finger) | Min 0.20 (± 0.03) | 7.9 (± 1.2) |
| Palm | Min 0.17 (± 0.03) | 6.7 (± 1.2) |
| Cuff | Min 0.13 (± 0.03) | 5.1 (± 1.2) |
| Un-aged | Aged | |
| Elongation at Break | Min 700% | Min 500% |
| Tensile Strength | Min 14.0 MPa | Min 14.0 MPa |
| Residual Powder Content: | Powder Free, <2 mg/glove (Modified Lowry Method) | |
| Protein Content: | Below 50 µg/g of glove | |
| AQL for Pinholes | 1.5 | |
TenuClean Latex Powder-Free Examination Gloves are designed and manufactured to meet or exceed the following national and international standards:
- Product Manufacturing Standards: EN 455-1, EN 455-2, EN 455-3, ASTM D 3578-01
- Quality System: ISO 9002, EN 46002
- Certifications: CE Mark, TUV, 510K
Caution: This product contains natural rubber latex, which may cause allergic reactions.